Drawings and documents
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 17 (1836), p. 272 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a Patent for an improvement in the manner of preparing and leaching Ashes, and manufacturing Potash. Granted to ELIJAH WILLIAMS, Harbour Creek, Erie county, Pennsylvania, August 15th, 1835. To all to whom these presents shall come-greeting,-Be it known, that I, Elijah Williams, of Harbour Creek, Erie county, State of Pennsylvania, have discovered and invented an improvement in preparing and leaching ashes and making Potash, and that the following is a full and exact description of the same, namely. The said improvement consists of two parts. First. Burning over crude ashes in a large body, by building fires under, in, or on them, which will in a few days burn the coal and most other impurities out of them. They are then in a running hot state, and in this manner they are boiled in pure water, or weak lye, about fifteen minutes with a brisk fire, using about equal proportions of water and ashes; then add unslacked lime, in the proportion of about one bushel of lime to ten or twelve bushels of ashes. Boil a few minutes longer, and let it off in the leach during the effervescence. Second. The boiled ashes are to be put in leaches from six to eight inches in depth, and boiling water applied until the strength is out of them; the ley is then boiled and melted down in the usual manner, this method produces a beautiful white article yielding from ten to fifteen per cent. more pure alkali than the best samples of commercial potash, manufactured upon any plan heretofore known, as I believe. Lime has heretofore been used in many ways in the manufacture of potash, but the inventor claims that the plan of burning over, and boiling the hot ashes, and the unslacked lime and letting them into the leach during the effervescence, as before described, was discovered by him, and is the chemical process on which he depends: he also claims that he did invent the hereinafter described machinery for the purpose of manufacturing ashes. The boiler used for boiling ashes, or ley, should be made of sheet-iron, or copper, on the following construction. With a flat bottom, about three feet six inches in width, about seven feet in length from twelve to sixteen inches deep, with a tube in the side, or end, for the purpose of letting off the contents-the size of said boiler may be increased and diminished, and it is to be set in an arch for use; the leaching trough should be about twenty feet long, two and a half feet wide, and twelve or fourteen inches deep, with a flat bottom, having a lime strainer fixed about two inches above the bottom, and a tube below the strainer, for the purpose of letting off the ley. Directions. The boiler being set in an arch for use, put in of burned over hot ashes, about ten bushels, with as many bushels of water, or weak ley, boil with a brisk fire about fifteen minutes, then put in one bushel of unslacked lime, boil about as much longer if it does not go over, then let it BALDWIN'S Plummer Blocks and Slides. off into the leaching trough during the effervescence. A greater or less charge may be put in according to the size of the boiler and leaching trough. Have the boiled ashes from six to eight inches in depth in the leaches; then first put on weak ley, hot if you have it, after which continue with hot water until the strength is off, boil the ley, and melt down in the usual manner. Clear ashes may be worked, (if not hot) by using more lime and boiling longer, but not to so good effect. ELIJAH WILLIAMS.
Editor's remarks. The practice of reburning the ashes was adopted, and proceeded in for a considerable length of time, more than forty years ago; and it was at first imagined that the amount of potash was thereby considerably increased. It was at length discovered, however, that the bulk was considerably reduced by the reburning, and that the apparent increase was principally due to this circumstance; the small increase produced by reducing the coal to ashes did not nearly compensate for the expense and labour of burning, and the plan was abandoned. We apprehend that the increased production spoken of by the patentee will be found to arise from the cause above stated.
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 16 (1835), p. 286 · View the page
453. Potash, making.-Elijah Williams, Harbor Creek, Pa.
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 16 (1835), p. 287 · View the page
516. Mould-boards. - William Hoth, Buffaloe, New York,
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 17 (1836), p. 197 · View the page
12. For Making Potash; Elijah Williams, Harbour Creek, Erie county, Pennsylvania, August 15.
Remarks. (See the specification.)
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 17 (1836), p. 271 · View the page
I intend sometimes to use the drying and the spreading apparatus detached from each other, in which case but two rollers, of any convenient size, will be employed in the drying process, and steam may then be introduced into each of them. I intend also, sometimes, instead of the large drying cylinder above described, to cause the cloth to pass over a stationary metallic box, or steam case, in its passage from the spreading to the straining or carriage roller, making the upper surface of this case convex, that the cloth may be kept in close contact with it; the space between the two sides of such box, or case, need not be more than from one to two inches. What I claim as my invention, and for which I ask letters patent, in the above described apparatus, is a machine for spreading India rubber upon cloth constructed, and operating, substantially, in the manner of that herein set forth. I do not claim the mere spreading of the substance by means of cylinders, this having been previously done, but we do claim the employment of two cylinders for the purpose, connected together, and made to concur, in producing this effect, acting upon the principles described. I also claim the general arrangement and application of the apparatus, for the drying of the solution by means of steam, either in combination with, or separate from, the spreading apparatus, as I contemplate the using of them either conjointly or separately, as hereinbefore set forth. I do not claim drying cylinders, or boxes, heated by steam, as my invention or discovery, but the combination and application thereof in the way, and for the purpose by me herein fully made known. Specification of a Patent for an improvement in the manner of preparing and leaching Ashes, and manufacturing Potash. Granted to ELIJAH WILLIAMS, Harbour Creek, Erie county, Pennsylvania, August 15th, 1835.
Remarks. To all to whom these presents shall come-greeting,-Be it known, that I, Elijah Williams, of Harbour Creek, Erie county, State of Pennsylvania, have discovered and invented an improvement in preparing and leaching ashes and making Potash, and that the following is a full and exact description of the same, namely. The said improvement consists of two parts. First. Burning over crude ashes in a large body, by building fires under, in, or on them, which will in a few days burn the coal and most other impurities out of them. They are then in a running hot state, and in this manner they are boiled in pure water, or weak lye, about fifteen minutes with a brisk fire, using about equal proportions of water and ashes; then add unslacked lime, in the proportion of about one bushel of lime to ten or twelve bushels of ashes. Boil a few minutes longer, and let it off in the leach during the effervescence. Second. The boiled ashes are to be put in leaches from six to eight inches in depth, and boiling water applied until the strength is out of them; the ley is then boiled and melted down in the usual manner, this method produces a beautiful white article yielding from ten to fifteen per cent. more pure alkali than the best samples of commercial potash, manufactured upon any plan heretofore known, as I believe. Lime has heretofore been used in many ways in the manufacture of potash, but the inventor claims that the plan of burning over, and boiling the hot ashes, and the unslacked lime and letting them into the leach during the effervescence, as before described, was discovered by him, and is the chemical process on which he depends: he also claims that he did invent the hereinafter described machinery for the purpose of manufacturing ashes. The boiler used for boiling ashes, or ley, should be made of sheet-iron, or copper, on the following construction. With a flat bottom, about three feet six inches in width, about seven feet in length from twelve to sixteen inches deep, with a tube in the side, or end, for the purpose of letting off the contents-the size of said boiler may be increased and diminished, and it is to be set in an arch for use; the leaching trough should be about twenty feet long, two and a half feet wide, and twelve or fourteen inches deep, with a flat bottom, having a lime strainer fixed about two inches above the bottom, and a tube below the strainer, for the purpose of letting off the ley. Directions. The boiler being set in an arch for use, put in of burned over hot ashes, about ten bushels, with as many bushels of water, or weak ley, boil with a brisk fire about fifteen minutes, then put in one bushel of unslacked lime, boil about as much longer if it does not go over, then let it BALDWIN'S Plummer Blocks and Slides. off into the leaching trough during the effervescence. A greater or less charge may be put in according to the size of the boiler and leaching trough. Have the boiled ashes from six to eight inches in depth in the leaches; then first put on weak ley, hot if you have it, after which continue with hot water until the strength is off, boil the ley, and melt down in the usual manner. Clear ashes may be worked, (if not hot) by using more lime and boiling longer, but not to so good effect. ELIJAH WILLIAMS. Remarks by the Editor. -The practice of reburning the ashes was adopted, and proceeded in for a considerable length of time, more than forty years ago; and it was at first imagined that the amount of potash was thereby considerably increased. It was at length discovered, however, that the bulk was considerably reduced by the reburning, and that the apparent increase was principally due to this circumstance; the small increase produced by reducing the coal to ashes did not nearly compensate for the expense and labour of burning, and the plan was abandoned. We apprehend that the increased production spoken of by the patentee will be found to arise from the cause above stated.
About this record
- Patentee
- DATAMP
- Date
- DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- The sources give different dates; the date shown is the one most of them agree on.
- The Franklin Institute's journal gives a different date.
- in_burke