Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 16 (1835), p. 89 · View the page
20. For a Rake Tooth Machine; Giles Dayton, of Blandford, Hampden county, and William Stedman, of Tryingham, Berkshire county, Massachusetts, January 13.
Remarks. A mandrel, which may be made of wood, is so mounted as to run in collar heads, in the manner of a lathe mandrel. The end of this is bored of a proper size and depth for a rake tooth, the hole being made trumpet mouthed. Three cutters are fixed to operate upon the piece to be formed, one of them in the mouth part, one, of about three inches in width, in the straight part, and one beyond this, which rounds off the point of the tooth. The timber is cut into lengths of about five and a half inches, and rived into pins of about half an inch square; these, held in a clamp made for the purpose, are passed into the revolving mandrel; they are then reversed in the clamp, and passed in again, so as to round the part left in the first operation. About four or five thousand can thus, it is said, be prepared in a day. There is no claim, and the whole machine is, therefore, patented; cutters of this kind have been before used in revolving mandrels, but still the particular adaptation of the apparatus to the purpose designated, is, if new, which we believe it to be, a proper subject for a patent.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 16 (1835), p. 97 · View the page
40. For a Bedstead Machine; Aaron Stedman, Pittsford, Monroe county, New York, January 16.
Remarks. This bedstead machine is intended to cut a right and a left handed screw on the opposite ends of bedstead rails, and also to cut female screws into the posts to correspond with them. The things claimed are, "First. The cast iron augers, with the cutters dovetailed into the same. Second. The boxes or plates accompanying the augers. Third. The caps upon the screw tools, to regulate the cutting of the screw. Fourth. The standards, or head block, and heel block, with the screws attached to the same. By means of these improvements, the screw in the ends of the rails, and the nuts or boxes in the posts, are always cut uniform, so that the bedstead will in all cases come together with close joints." Bedsteads screwed together in the way proposed, are not so good as those furnished with good screws of the common kind, or as those that have some of the dovetailed wedge fastenings which have been patented. Notwithstanding the contrivances described by the patentee, screws formed of wood, on the opposite ends of a rail, will not uniformly strain up together. The patentee uses what he calls an auger, of cast iron, for cutting the female screws; this auger does not differ from the tools in use for the same purpose, unless the making them of cast, instead of wrought iron, is to be considered a patentable difference.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- in_burke