Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 15 (1835), p. 399 · View the page
"The advantages of this machine will be obvious to all who have used the roving from the various condensing speeders, condensing by counter twist, or by rubbing; and the many attempts which have been made to impart the necessary strength to these rovings, show the importance of the results now obtained; and by using this simple improvement, the roving, in all respects better than that from the geared speeder, or fly frame, is obtained, and the great expense of those frames saved to the manufacturers. As many parts of this machine have been long known, such as the traverse and winding motions, and others-we, therefore, to the invention of these parts, separately, lay no claim whatever; but what we do specifically claim as our invention, is, all the parts and arrangement of the spindle above the bearing, consisting of the can, or cup, as arranged and fitted for turning the bobbin; and the principle and method of throwing off the roving from the bobbin by the action of the centrifugal power of its motion, and sustaining it against the inside of the can until drawn away by the receiving bobbin, and imparting to it, during this process, any quantity of twist, as before described. And we also claim the other parts of this machine as combined with the new parts invented by us, and the general arrangement of these parts as before described, by which we have produced a new and useful process or series of machinery, never before known or used." 26. For a Weighing Instrument, called the "Eagle Balance;" Levins Jencks, and Henry Dexter, Killingly, Windham county, Connecticut, November 24.
Remarks. As this is called an eagle balance, we suppose that it is intended for weighing golden eagles, although, so far as accuracy is concerned, it would seem to be better adapted to the weighing of bald eagles, in which a grain more or less would not be a thing of very serious consequence. We have, in fact, never witnessed an equally ridiculous attempt at improving the common scales, than that now presented to us. Instead of a beam, there is to be a wheel, or pulley, which is to be suspended by a pivot, or pin, at its upper edge, by which it is to hang loosely; a strap, or chain, is to pass over the periphery of this wheel, and to one end of this strap the dish is to be suspended, and a counter weight hangs by the other. An index attached to the wheel reaches up to a graduated arch, its tilting causing the index to move. When more ponderous articles are to be weighed, a jointed index is employed, which has no fewer than four screws serving as fulcra, upon which turn the combined levers connected with it. The description, or specification, is in good keeping with the invention, being as imperfect and incongruous as it could well be made, and at the same time committing manslaughter upon orthography and mechanics.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 15 (1835), p. 400 · View the page
We have thus allowed the patentee to give his own testimony in his own way; a principal reason for our so doing, has been the seeming intangibility and indefiniteness of the thing patented, at least to us, possibly because we have never been a cutter of grain and grass; we refer the whole, therefore, to the judgment of the husbandman. 28. For an improvement in Axles and Boxes of Carriages and Rail-road Cars; Dexter C. Force, and Frederick Davis, city of Baltimore. First patented on the 6th instant; patent surrendered, and reissued on an amended specification, November 24.
Remarks. A notice of this patent, as first issued, will be found on turning to p. 390; and it will be observed that no claim was made by the patentees; an omission which is now supplied. We extract the following from the present specification. "The box in the wheel we make of iron, or other metal, extending through the nave of the wheel, with one or more chambers in it, sufficient to contain the oil; and on the outer end, next to the axle nut, we leave a flanch of about threeeighths of an inch, or proportional to the size of the wheel, which is made to fit into a rebate formed in the axle next to the nut, by being turned down a little shorter than the nave, so as to permit the flanch of the box to fit in, and prevent the oil from escaping, and dirt from working into the box." "What we claim as our invention, and not hitherto known or used in the above described axle and box, is the thimble, or ferule, and its application to axles of carriages, rail-road cars, and all kinds of mill gearing and machinery where the same can be used. And in the box we claim the flanch."
About this record
- Patentee
- the Journal of the Franklin Institute, Journal
- Date
- the Name and Date index of patents, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- The patentee's full name comes from the Franklin Institute's journal.
- in_burke