Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 14 (1834), p. 130 ยท View the page
Even the modification which admits of the use of an inclined plane has been specifically claimed in a former patent; and as to the formation of beads and other ornaments by means of rollers, we have known it from boyhood, and that is some time ago. There are in use several machines for rolling axes and other tools, and eccentric rollers for plane irons specifically. We have had occasion more than once to advise persons who proposed to take patents for the same thing, that they had been forestalled. 47. For a Water Wheel, called a "collective power water wheel;" Isaac Harrison, Middletown, Frederick county, Virginia, January 31.
Remarks. In high falls, where it is desirable to use all the power of the water, two or more overshot wheels have sometimes been placed one above the other, to receive the water in succession. This is done in those cases only where a single wheel could not conveniently be made of sufficient diameter. We have in the course of our animadversions, had occasion, formerly, to advert to this plan, and here we have it brought before us again under the form of a new patent, in which the patentee tells us that "the invention here claimed consists in the use of two or more water wheels placed above each other; the water of the one being thrown upon the one below, and the power collected for driving mills and machinery, as before described." We have been acquainted with this application of water for at least forty years, and in our recollection upon such subjects, extended much farther back, we have no doubt that we might add a corresponding number to the forty. Such combined wheels, it is true, are not in common use, and that for the simple reason that the situations in which they are applicable are rare; we presume, however, that there are but few countries where they may not be found. SPECIFICATIONS OF AMERICAN PATENTS. Notice of the specification of a patent for an improvement in the machinery for spinning Rope Yarn, and Duck Twine. Granted to James Lang, of Greenock, in the kingdom of Great Britain, in pursuance of an Act of Congress, passed July 30th, 1832, entitled "An act directing letters patent to be issued to Thomas Knowles, James Lang and William Steel, respectively." Issued January 16, 1334. On turning to Vol. xi. p. 4, there will be found a notice of the above named Act, accompanied by some remarks. It will be seen that eighteen months had elapsed after the passing of the act, before the issuing of the patent, and as, by the terms of the law, the machinery must be put into actual operation within two years of its date, the time for doing so has now nearly elapsed. We have not heard what has been done upon this subject, but as it was the design of the agent of the inventor to import the machinery in its perfect state, and to set it up in Kentucky, this has probably been done, although the fact has not come to our knowledge. The specification of Mr. Lang's machinery is accompanied by three large drawings, which are referred to throughout. To those persons, however, who are conversant with what has been done in the spinning of flax and hemp by machinery, a sufficiently clear idea of the proposed improvements may be communicated without the drawings; and to others, the subject, if more fully treated, would not be one of much interest. The specification commences by observing that there are certain machines known by the name of Gill spreading or drawing heads, and Roving or spinning frames, which have been used by flax spinners, for spreading or drawing, roving or spinning flax, to produce yarn suitable for sail cloth, and other coarse linen fabrics; but that these machines have not hitherto been applied for producing coarse yarn suitable for making cables, ropes, or cordage; and that his improvement consists in the application of some parts of these known machines, in combination with other parts not heretofore used in such machines; the combination and arrangement of these old and new parts being such as to effect the drawing and spinning of flax, hemp, or other fibrous materials, into yarn fit for cables, ropes, or cordage. The machine as first described appears to differ but little, if at all, from that known under the name of "the first spreading or drawing frame," having a feeding apron, or horizontal band of leather upon which the material to be spun is spread, and by which it is carried forward to feeding rollers, on leaving which it is acted upon by gills, or needles, fixed on to an endless chain, between the feeding and drawing rollers, which draw and deliver it in the form of a sliver, into a can in front of the machine. As the different kinds of hemp and flax vary considerably in the length of their fibre, it is observed by the patentee, that, if the feedLANG'S Rope Yarn Machinery. ing rollers were fixed at an invariable distance from the ends of the gills, the ends of the fibres would not always be caught properly by them, but would sometimes fall short of, and at others overlap them; and that to obviate this, the frame carrying these rollers is made capable of sliding, so that its distance may be varied in any required degree. When the hemp or flax is of a very short fibre, he sometimes uses two pair of feeding rollers. These rollers are also made capable of being elevated or depressed, as well as moved horizontally, so that the depth to which the gills shall enter may be regulated by the height at which the feeding takes place. The gearing is so arranged as to cause the surfaces of the drawing rollers to move with from 40 to 60 times the speed of those of the feeding rollers, according to the quality of the material. After the sliver has been prepared in the first machine, it is passed through a second, nearly identical in its construction, but made considerably lighter, and double, so as to pass two slivers through separate feeding and drawing rollers, having also two sets of gills, or points. The speed, as before, must, necessarily, be adapted to the kind of work to be performed; separate cans are used to receive the slivers as delivered. A third drawing machine is next to be used, which does not in any respect differ from the second, excepting in the proportionate speed given to the parts respectively, so as still further to elongate, or draw out the slivers. The fourth and last machine employed is, in part, constructed like the former, but with the addition of the spindles and their appurtenances, as it is in this machine that the slivers receive their last drawing, and are to be spun into yarn. These slivers pass from the drawing rollers through funnel shaped tubes, within which are pieces of felt, intended to hold and smooth the surface of the yarn, as it is held and smoothed in leather or felt in spinning through the hand. The spindles, bobbins, and fliers are like those in ordinary use, but made stronger, and turned with more power, corresponding with the coarseness of the thread which is to be spun by them. As in spinning coarse yarns it is necessary that there should be a considerable drag upon the spindles, springs, capable of being tightened, are made to press upon the peripheries of cylindrical barrels attached to them below the spools. The patentee states, in conclusion, that "he has described many parts, in the machinery used by him, which are not new, but that his improvement consist, 1st. In the arrangement of the feeding rollers, as described, whereby the same are movable, so that their position relatively to the gills or needles, can be adjusted. 2nd. In the apparatus described for receiving the slivers from the drawing rollers of the roving frame, and which contain layers of felt or cloth through which the yarns are drawn by the fliers of the bobbin spindle. 3dly. In the method of applying friction readily, in order to produce such a resistance of the bobbins to be turned round as will cause the yarn to be taken up and wound properly in the bobbins. The said improvements are claimed when the same are applied in conjunction Nott's Economizing Heat. with the other known parts; being so proportioned and arranged as to act properly with my improvements, and to form when combined with them, a series of machines for the purposes of producing from flax, hemp or similar fibrous substances, dressed or undressed, wove yarn, suitable for making ropes or cordage." Remarks by the Editor. We confess that we have been much disappointed in the anticipations which we had entertained when we were about to examine this specification. We could not have conceived it possible that the space which it occupies, and the drawings which accompany it could have been devoted to improvements so simple in their character, and so easily described. As respects the three things claimed, two of them, at least, may be dispensed with. Thus, for example, instead of making the rollers adjustable, as described, separate machines, differently proportioned, would produce the same result, although, certainly, at a greater expense. It may admit of a doubt, however, whether there is sufficient novelty in this part to sustain the claim, the making of rollers adjustable in similar machinery being a very common practice. The third claim, forincreasing the drag on the bobbin, must be confined, as it is, to the particular mode of accomplishing it, as the same end has been heretofore attained by other means; such, for example, as embracing the spindle by a leather collar, the friction of which is regulated by weights, and other modes that will readily suggest themselves. The second claim, to the felt, or cloth, in the conical funnel, alone remains, and this probably, is new, and may be the best mode of attaining the end, and this, in our opinion, is all that can be safely looked to for sustaining the patent, but it is claimed in conjunction with the others. Should it appear, however, that, from any cause, the machinery now patented produces a better effect, in making coarser yarn than has heretofore been produced, we shall readily admit this as a sufficient proof of novelty, and shall heartily wish all success to the proprietors.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- in_burke