Drawings and documents
National Archives restored drawings: drawing
Peter Cooper's Patent Drawing for a Steam Boiler
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Text on the drawing
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
122 STEAM. / 2 BOILERS. / 149 Water Fire Boxes. / St. Eng. Boilers / $ 150 950 / PETER COOPER'S / CLASSIFICA ITON / 6796.4 / Steam Boiler / DIV ISION. / Explanation of the Froures. / Patented 13th October 1831. / A. The upper Chamber of the Boder / B. The Zower D: / vol 12 - page 299 / C. Cylinder orpipe connecting the tuo Chambers / D. The Furnaco / EE.Water surrounding The Furnace tubes fee / M. / F. Ash-hole / G. Open space between The upper and Zewer Chambers / 1110 / H. Projection from Hee Furnace, increase The / surface expose d to fire. / K. Jacket covering The whole apparatus / LLL. open space between Hie Tacketanam Boiler / OK / M. Steam pepe N. Furnace door, O. opening for the draft / P. Waterpipe Qesta nchions uniting The upper and Zower / chamber. R water Zenet. es ash-hole door / TT. Bolts uniting sides of Furnace & Tower chamber / u. C ocks for ascertaining The water preseam in the Boiler / G. / a.a.a.a. Tubes admitting to the Fire / b.b.b. Tubes for heating heating wateren the lower Chamber / c.c.c.c. B 0713 consuming The ends of the upper Chumber. / 1, / 00011 / Scale of Inchte wfoot / Fig.1. Shewing all the parts of The Boiler a as if it were transparent / Outside of the Borter. Section thre The centre / N.B. The tubes are colored brown. the botts, dark blue: water, light Wue / The space occupied by water is colored blue; & the space occupred / See Specification / by beated air, nink See Specification. / A part only of the tubes & bolls are shewn in The drawing.
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 9 (1832), p. 232 · View the page
17. For an improvement in the construction of Steam Boilers; Peter Cooper, city of New York, October 13.
Remarks. This boiler is one of those which is so constructed as to expose a large surface to the action of heated air from the furnace, by dividing the inside into separate chambers, and by using tubes which communicate from one to the other. Its exterior form is that of a vertical cylinder, the outer case forming a jacket between which and the respective chambers, a portion of the draft may pass. The furnace is a hollow drum, upon the flat bottom plate of which the fuel is placed; water is contained below, above, and around it. Air is supplied from the ash pit through numerous tubes secured at one end to the bottom of the cylindrical jacket, and at the other to the bottom of the furnace. From the top of the furnace pass up tubes, surrounded by water, and which open into a space under an upper drum, or chamber, containing water. Iron bolts pass from the bottom to the top of this upper chamber, to sustain the heads against the pressure of the steam; and there are similar bolts wherever else they may be thought necessary. There are several particulars in the construction of this boiler which are claimed, the principal of which are the following: The mode of constructing the bottom of the furnace of parallel plates, between which water is contained, and through which tubes pass to supply air to the fire; thus obviating the objection to the hollow bars, filled with water, which have been repeatedly tried, without success, as they are apt to burn off in consequence of the water being converted into vapour, an accident which the volume of water and the particular construction of this furnace will prevent. The separating of the boiler into two parts, and the tubes in the lower one, are also claimed; likewise the outer covering, or jacket, so constructed that the smoke and dust are forced out in a downward direction under the bottom of the boiler; and finally "the combination and form here described, in principle, as well as in detail."
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 9 (1832), p. 236 · View the page
28. For Measuring for and Cutting Garments; James Henderson and Cooper K. Watson, Zanesville, Muskingum county, Ohio, October 12.
Remarks. If a judgment may be formed of the progress of any art by the improvements in it which are registered in the patent office, that of the tailor has not lagged behind in the grand race. It is not to the patent office alone, however, that we are indebted for a proof of this fact; no mean portion of the literature of the day has been devoted to the same subject, and we meet, almost everywhere, with pictorial illustrations of the variety of modes in which "nature's noblest work" may be embellished, or distorted, by the directors general of the fashionable world. We have neither the theoretical nor the practical knowledge necessary to perceive the nice shades of difference in the various instruments contrived to assist the professional artist, and from fear of displaying our ignorance, as we have not had room for the whole, we have hitherto given but a brief and general view of them, a practice from which we shall not venture to depart on the present occasion. The principal instrument now before us consists of a vertical measuring rod, sufficiently long to take the altitude of the tallest man. Upon this standard there are three sliding pieces with projecting arms, which are to be adjusted so as to mark the three cardinal points in the longitudinal admeasurement. To the uppermost of these slides, a scale of about three feet in length is attached; this scale slides in a groove in the standard, and is provided with graduated divisions, the correspondence of which with, or relationship to, other divisions upon the standard, indicate the manner in which the garment must be marked, before the shears are employed. These indications are properly explained in the specification, to which those interested are referred. For the rotular and diagonal admeasurements, leather straps are employed, which are to be properly graduated. In the art of drafting the garment, a square is to be used, which square has graduations upon it corresponding with those of the general system, and adapting it to individuals in all their varying proportions. The claims are to "the groove in the standard by which the length of the body, and a certain permanent point for the waist are ascertained; and to the straps by which the various curves and irregularities on the surface of the body are measured, and also the square described, and the manner of ascertaining the curve of the waist and spring of the skirt."
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- in_burke