Drawings and documents
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 7 (1831), p. 320 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a patent for an improvement in Tanning. Granted to OSMOND COGSWELL, Cincinnati, Hamilton county, Ohio, January 29, 1831. THE improvement consists in applying a solution of oak or other bark to hides or skins, in such manner, as that when the glutinous particles of the hide have absorbed and become mixed with the tanning, or astringent principle, the other part of the solution (viz. the water,) may pass off and leave the hide free to receive more of the solution, and so on till it is tanned. The object is to expedite the process of tanning, and consequently to diminish the amount of capital necessary to be employed in the business. The apparatus, and mode of application is as follows. Make a frame of timber of a square form; the width to be made as great as the width of the hides, parts of hides, or skins, that are to be tanned; the height and length to suit convenience. Near the bottom, or ground of said frame, a tight floor is to be formed of the length and breadth of the frame; said floor to incline to one side so as to carry off the liquor after it has passed through the hide; the sides and ends to be raised from two to four inches above the floor, by fastening strips of plank on the inside of the frame; this will appear like a box; say four feet wide, two inches high on one side, and four on the other, and twenty feet long; (these boxes may be fixed one above another, about twelve inches apart to the top of the frame;) said boxes to be filled with saw dust, or any other soft porous substance, that will not prevent the solution from running through the hide, and at the same time absorb and carry it off after it has passed through. On this surface, (of saw dust,) the hides, sides, or skins, (after having been prepared in the usual mode for tanning, except that the flesh is to be taken off clean,) are to be smoothly spread out, and in order to keep on them a sufficient quantity of the solution, make sacks of coarse cotton or other cloth, an inch or more in diameter; fill them with the same material that the boxes are filled with, and place them around under the edges of the hides, which will raise said edges equal to the diameter of the sacks. After this is done, pour on the hides as much of the solution as the hollow surface which they will then present will hold, and continue to fill them up as it runs off through the pores of the hide, for the space of from three to fifteen days, (the time in proportion to the thickness of the hide or skin,) in which time they will be tanned, except the extreme parts or edges, which cannot be brought so fully under this process as the other parts of the hides: and in order perfectly to tan them, it is necessary to lay them in vats after the common mode, for three or four weeks. OSMOND COGSWELL.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 7 (1831), p. 314 · View the page
41. For an improvement in the Art of Tanning; Osmond Cogswell, Cincinnati, Hamilton county, Ohio, January 29.
Remarks. (See the specification.)
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 7 (1831), p. 319 · View the page
The gate must be constructed of plank well jointed and secured together, and be of a height corresponding with the greatest depth of water intended to be maintained on the upper level. This gate is connected with an air box, buoy, or float, placed in the lower level, which box, buoy, or float, must be of a size and buoyancy sufficient to raise the gate as the water shall rise in the lower level. This box, buoy, or float, is connected with the gate in the following manner. Two, or more, screws, are required with flat heads, resting on the top of the box, buoy, or float, and secured to it by metal plates, having holes in them sufficiently large to admit the shank of the screw to pass upwards through them. When these plates are fastened to the box, buoy, or float, the heads of the screws will turn under them in the manner of a swivel. Holes corresponding with the screws must be bored in the lower edge of the gate, and be of sufficient depth to admit the box, buoy, or float, and the gate to be screwed together, or apart, so as to maintain any required quantity of water on either level. Screw nuts must be placed in these holes so as to govern the gate. The screws are provided with holes in their shanks, near the box, buoy, or float, to admit the end of a turning bar or lever, for the greater convenience of working them. When it is intended to maintain a greater quantity of water on the upper than the lower level, the gate must be screwed from the box, buoy, or float; when the greater quantity is required on the lower level, the gate must be screwed towards the box, &c. The operation of the machine will be as follows. The water, in passing the conduit, will flow over the top of the gate into the lower level; as the water rises in the lower level, the buoyancy of the box, buoy, or float, will force the gate upwards until the required quantity is obtained in the lower level, when the upper section of the conduit will be closed by the gate. Should the water sink in the lower level, the weight of the box, buoy, or float, will draw the gate downwards, so as to admit the water to pass over its upper edge, thus producing a regular supply, and such depth of water in the canal, at all times, as may be desirable. E A D C D C B A, regulating gate. air box. C, C, screws. D, D, gate posts. E, cap sill. F, mud sill. JAMES CLARKE. Specification of a patent for an improvement in Tanning. Granted to OSMOND COGSWELL, Cincinnati, Hamilton county, Ohio, January 29, 1831.
Remarks. THE improvement consists in applying a solution of oak or other bark to hides or skins, in such manner, as that when the glutinous particles of the hide have absorbed and become mixed with the tanning, or astringent principle, the other part of the solution (viz. the water,) may pass off and leave the hide free to receive more of the solution, and so on till it is tanned. The object is to expedite the process of tanning, and consequently to diminish the amount of capital necessary to be employed in the business.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- in_burke