Drawings and documents
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 7 (1831), p. 316 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a patent for an improvement in the mode of making Harrows for the purposes of agriculture, called Revolving Harrows. Granted to SAMUEL RUGG, Lancaster, Worcester county, Massachusetts, January 11, 1831. THIS improvement in the harrow is more particularly described as follows, and I refer to the drawings of the same accompanying this specification, and the model deposited in the office, for a more complete and full understanding of the improvement. A C A B F In the drawing, A, A, are two horizontal bars forming a triangle, and joined at B. B, is the forward part of the harrow. C, C, the junctions of the bars at the other end of the frame and with A, A, and B, constituting the whole frame. D, a brace running from B, to a middle point between C, C, and is also extended as a runner when the harrow is turned over on its back, for the purpose of being drawn over the ground without obstruction. E, E, are two cylindrical rollers which come near together at the point F, and revolve at each end on their axes. These cylinders diverge till they reach the part of the frame C, C, where they are inserted, and may be made to constitute, at pleasure, either a greater or less angle than A, A. a, a, a, &c. are iron teeth, part of which are visible in the drawings. These teeth are mortised into the rollers, the same number in each roller, and pass entirely through, and have sharp edges, with backs, resembling in some degree the blades of penknives, and varying in size with the size of the rollers and frame. These teeth may be grooved, or made concave on one side, or may be of plain surfaces. b, b, b, &c. some of which are visible in the drawing, are pieces of iron inserted in A, A, and extending downward towards the rollers, for the purpose of clearing them from sods, earth, or other obstruction. The mode in which this harrow is worked is as follows. The power is applied at the end near to B. The rollers are thus immediately put in motion, and continue revolving in opposition to each other; that is, revolving in opposite directions, and outwardly from the frame on either side. This improved harrow is very useful in cross furrowing, and particularly so in subduing rough land, and soils that are stubborn, either from roots, or otherwise; and breaks up and mellows the land with great advantage. It is also easier for draft than the common harrow of the same size. The principle to be secured is the revolving principle as applied to the harrow. The form is of less consequence. The petitioner contemplates the use of his improved harrow in other forms; for instance, the bars A, A, may be brought nearer together than C, C, or may be entirely removed, and D only retained. E, E, may be made to diverge more or less, or work in parallel lines, and revolve either way by varying the form of the teeth; and a single roller may be used with a handle at the end opposite to the draft, for light harrowing, or cross furrowing. SAMUEL RUGG.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 7 (1831), p. 306 · View the page
20. For an improved mode of making Harrows for the purpose of Agriculture, called the "Revolving Harrow;" Samuel Rugg, Lancaster, Worcester county, Massachusetts, January 11.
Remarks. (See the specification.)
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 7 (1831), p. 315 · View the page
THIS machine is composed of a shaft, or reel, used in place of a wheel or crank, to give the twist or turn for laying strands or rope; so that a strand or rope can be twisted or laid in certain lengths at a time, until a rope or strand is twisted or laid of any required length. The shaft to be fixed to revolve on proper supports, (in boxes, or gudgeons, &c.) made of proper materials, with a hole passing into the side and out at the end, so that when a rope or strand is coiled on the shaft, the end of it can pass through the eye thus made in the end of the shaft, not interfering with the supports; thus giving a chance for spinning to it another length of yarn; then the shaft being turned, gives the turn for the laying of strands or rope, which, when so laid, is again to be reeled, leaving the rope out as RUGG's Improvement in making Harrows. before: thus on-laying, and spinning, until any required length is finished. The chief object is to make a rope of any assignable length in one piece, by laying it in portions of convenient length, and spinning into the threads of the end of such parts as is already laid. In laying several ropes into a layer, or tarred yarn into a rope, the reels or machines must be equal to the number of strands and rope, and may remain stationary, or be placed on slides, or truck wheels, as may be necessary. EDWARD S. Townsend, PHILO DURFEE. B A A, shaft. B, rope passing out at the end of the shaft. Specification of a patent for an improvement in the mode of making Harrows for the purposes of agriculture, called Revolving Harrows. Granted to SAMUEL RUGG, Lancaster, Worcester county, Massachusetts, January 11, 1831.
Remarks. THIS improvement in the harrow is more particularly described as follows, and I refer to the drawings of the same accompanying this specification, and the model deposited in the office, for a more complete and full understanding of the improvement. A C A B F In the drawing, A, A, are two horizontal bars forming a triangle, and joined at B. B, is the forward part of the harrow. C, C, the junctions of the bars at the other end of the frame and with A, A, and B, constituting the whole frame. D, a brace running from B, to a middle point between C, C, and is also extended as a runner when the harrow is turned over on its back, for the purpose of being drawn over the ground without obstruction. E, E, are two cylindrical rollers which come near together at the point F, and revolve at each end on their axes. These cylinders diverge till they reach the part of the frame C, C, where they are inserted, and may be made to constitute, at pleasure, either a greater or less angle than A, A. a, a, a, &c. are iron teeth, part of which are visible in the drawings. These teeth are mortised into the rollers, the same number in each roller, and pass entirely through, and have sharp edges, with backs, resembling in some degree the blades of penknives, and varying in size with the size of the rollers and frame. These teeth may be grooved, or made concave on one side, or may be of plain surfaces. b, b, b, &c. some of which are visible in the drawing, are pieces of iron inserted in A, A, and extending downward towards the rollers, for the purpose of clearing them from sods, earth, or other obstruction. The mode in which this harrow is worked is as follows. The power is applied at the end near to B. The rollers are thus immediately put in motion, and continue revolving in opposition to each other; that is, revolving in opposite directions, and outwardly from the frame on either side. This improved harrow is very useful in cross furrowing, and particularly so in subduing rough land, and soils that are stubborn, either from roots, or otherwise; and breaks up and mellows the land with great advantage. It is also easier for draft than the common harrow of the same size.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- in_burke