Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 7 (1831), p. 160 · View the page
: 25. For an improved labour-saving Tanning Apparatus; William Brown, City of New York, November 11.
Remarks. (See the specification.)
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 7 (1831), p. 180 · View the page
What I claim as new, is, the uniting together of layers of wood in longitudinal and transverse courses, in the manner herein described, either in the building of bridges, aqueducts, or other structures; and generally the application of the same principle which I have adopted in the building of boats and sea vessels, to the erection of structures on land. WILLIAM ANNESLEY. Remarks by the Editor. -The space occupied by the foregoing specifications forbids our making any extended remarks upon the BROWN'S Labour-saving Tanning Apparatus. merits of Mr. Annesley's plans. We know, however, that he has devoted many years of his life, and expended large sums of money, in bringing them to their present improved state. In the building of vessels in particular, to which he has principally devoted his attention he has necessarily, at every step, had to encounter the selfinterest, and the honest prejudices of the ship builders. His method is, as regards their business, a revolutionary measure, and should it eventually supersede the long established method of building vessels, it is not likely that he will ever reap the reward of his labours. Innovations of the description proposed, are rarely accomplished in a single generation. That his plan of uniting timber will insure to his structures a greater degree of strength than can be obtained from the same weight of material, combined in any other way, we have no doubt. The strongest objection which presented itself when the plan was new to us, arose from an apprehension that the infiltration of water between the layers, would produce early decay. We, however, are assured, that after the experience of many years, no such effect has been produced. Whether his mode of building may be as advantageously applied to the construction of the larger class of ships as to vessels of a smaller size, may admit of doubt: that those of considerable burthen may be so built, and that they will be strong and durable, has been abundantly proved, although constructed in a way much less perfect than that now adopted. We understand that Mr. Annesley is likely to have an early opportunity of building a government vessel upon his principles. We have given but a small portion of the second specification, as our only object was to present the main features of the invention. The skilful mechanician will have no difficulty in perceiving how it may be applied to domes, aqueducts, and other structures. Specification of a patent for a Labour-saving Tanning Apparatus. Granted to WILLIAM BROWN. City of New York, November 11, 1830.
Remarks. THE improvement herein claimed by the subscriber, is the connecting and concentrating of the various processes through which the hides pass before they become leather, by means of suitable machinery, into one apparatus, the construction of which is as follows. There are four, or more, leatches, or cisterns, for infusing the bark, which are placed contiguous to the handlers, or vats, on the same level, but projecting at the top above them. These leatches, or cisterns, communicate with each other by means of tubes, inserted between them near the tops, and are supplied with false bottoms, which fit loosely, and which are perforated with holes, forming a kind of strainer. In each of the leatches is fixed an aqueduct or tube, which is used to convey the liquor from the bottom to the communicating tubes. By this contrivance the liquor is passed from the bottom of one leatch, into the top of the adjoining one, where it acquires a fresh portion of strength, and is thus propelled through the whole series, by pouring the water or weak liquor into the tops of the leatches, until it being of sufficient strength, arrives at the fourth or strongest leatch. There is also placed in one corner of each of these leatches, what is called an eye, which consists of a trunk projecting below the bottom of the leatch, and connected to a horizontal pipe, which serves to convey the liquor, when of sufficient strength, directly to the handlers, or vats; this trunk is supplied with a plug for regulating the quantity of liquor thus drawn off. At a convenient distance from the leatches, and on the same level with them, is placed a heater, which consists of two or more horizontal copper, or iron, pipes, which are placed one above the other, and have connecting tubes near their ends. These pipes are attached to and communicate with another, of a square form, in which the fire is made. These pipes, or heaters, are secured within a cistern, with their ends projecting at one side, and have caps for the convenience of cleaning. It will be seen that when a fire is kindled in the lower heater or box, the heat passes from it into the tube above at its farthest extremity, and comes forward and enters the next above, and so goes backward and forward until it enters the chimney at the opposite side, thus transmitting all the heat of the fire, to the liquor with which the cistern is constantly filled. There is a tube communicating with the heating cistern for supplying it with weak liquor or water, and communicates at its opposite extremity with a trunk or reservoir, which is furnished with a pump, by which the liquor is raised to the tube and forced into the heating cistern, which is kept constantly full by this means; the heated liquor passing off at a different tube, which communicates directly with the leatches. The leatches are filled with bark by means of a conveying trough communicating with the elevators of the mill. The strong liquor or infusion passes from the bottom of the leatches as before mentioned, into a trunk passing into a horizontal position under them, and rises by a vertical tube inserted in said trunk, from which it is transmitted to another horizontal trunk communicating with the handlers, or vats, and passing along their upper surfaces. By this method the liquor from the leatches is transmitted into the tops of the handlers, or vats. At the bottom of the vertical tube, and within the lower horizontal trunk, is placed a valve moveable by means of a strap extending up through the said tube. This valve is to prevent the stronger liquor from entering the reservoir, and thus mixing with the weaker. The liquor after having passed through the handlers, or vats, is drawn from their tops by means of a hollow plug inserted into the lower trunk before mentioned, and runs into the trunk or cistern, from whence it is again transmitted to the heaters, and so on to the leatches; so that the same liquor is continually in use; the evaporation and waste of which is supplied by water. WILLIAMS' Method of Supplying Steam Boilers. In each of the handlers is a reel, or cylinder, formed by two circular heads secured at the required distance apart by longitudinal bars; and having gudgeons which work in slides, for the convenience of elevating or depressing them at pleasure. The hides are secured on the inside of the reels by means of hoops, which encircle the reels a short distance from their heads, and have pins on their outer surfaces by which the hides are fastened; or they may be thrown loose into the reels. The great saving of labour in this invention consists in the facility with which the hides may be kept in motion when immersed in the liquor. Each of the reels has a rag wheel attached to it, and is turned one notch at a time, by means of a shaft which is geared into a click, to be worked by hand, or may be moved by animal, water, or steam power. The piston of the pump in the trunk or reservoir, is attached to one of the shafts, and may be moved or unshipped at pleasure. There is what is called a beam house connected with this apparatus, where the hides are first limed before they are put on the reels.
About this record
- Patentee
- Jim Shaw's X-patent list
- Date
- the Name and Date index of patents, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- The Franklin Institute's journal spells the name differently.
- in_burke