Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 3 (1829), p. 423 · View the page
The mode of using this pan in manufacturing salt, is, first to build two stone walls parallel to each other, of a proper length, height, and distance apart, to receive the pan, on the top of which the pan is to be set; this forms a furnace, at one end of which a chimney is built for the purpose of creating a current of air through the furnace; at the other end of the furnace the fire is applied to heat the pan for boiling the salt water. What we claim as our invention and improvement, is, the bottom and sides being elliptical, or circular, which gives the metal an opportunity of contracting and expanding, without breaking. WILLIAM BLOCKSOM. JOHN T. FRACKER. Specification of a patent for the Cure of Crooked, or Inflected Spine, in the Human Body, consisting of various instruments, to be called the "Dormant Balance." Granted to JAMES K. CASEY, Esq., of New York. First issued, June 23d, 1828, afterwards surrendered for the purpose of amending some defects in the specification, and re-issued, January 21st, 1829.
Remarks. (WITH A COPPER-PLATE.) THIS machine consists of a plane frame, the flat surface of which is about the size of a common mattress, and upon the longer edges of which, gudgeons, or centres, are fixed, at or near its centre of gravity. These gudgeons, or centres, are received into proper boxes, or bearings, on fixed supporters, the height of which a little exceeds the length of the frame. The frame, therefore, can revolve upon its gudgeons, or centres, as about an axis passing through it in the direction of its breadth. Upon the top of this frame, there is a bracket, from which is suspended, by a cord passing over a pulley, braces, and bandages, to be attached to the head of the patient. The whole apparatus is shown in the annexed drawing and explanation. The mode of operating with this apparatus, is as follows. The frame being brought into a vertical position, or nearly so, upon its CASEY'S Dormant Balance. gudgeons, the patient is made to stand with his back against the side of the frame. The braces and bandages are then attached to his head, which is then drawn upwards by the cord passing over the pulley. By the direct gravitation of the lower part of the body, acting in opposition to the force by which the head is drawn upwards, the body is extended and the spine straightened. The force to be applied by the cord, must be varied according to the circumstances of the case; commonly about fifty pounds are required. After this extension has been continued from five to thirty minutes, the frame should be turned gently upon its axis, bringing the patient to a horizontal, or nearly horizontal, position, with the frame under and supporting him, the frame being kept in place by horses, chairs, or any proper supporters. The bandages are then to be removed from the head, and in this position the patient should remain an hour, or more, as may be convenient. When the patient intends to remain long in the horizontal position, it will be necessary, previously to turning the frame as before described, to interpose between it and the patient, a mattress or other soft body. The foregoing operation should be repeated from day to day, twice or three times a day, until the distortion disappears. In the preceding specification I have, for the purpose of making the application of my improvement more clearly understood, described with it certain instruments and parts which do not belong to this invention. Therefore, I hereby declare my invention, for which I claim letters patent, to consist in the combination and arrangement of the moveable frame with its supporters, and in making the braces and bandages to correspond with the motion of the head and the exercise of the arms and body, and thus, without danger or exposure to accident, providing for making an extension of the spine, when the patient is in a standing position; by which the extending force is counteracted by the whole weight of the body; and also providing for changing the position of the patient, from standing to recumbent, without removing him from the machine. JAMES K. CASEY. Explanation of the Plate. Figures 1 and 2 represent different positions of the apparatus, which can also be readily placed horizontally, in which case tressels, or horses, may be placed under the ends of the frame. A, the moveable frame, suspended by B, B, the gudgeons. C, C, the supporters. a, b, c, braces and bandages to be applied as shown in the drawing, which also exhibits the manner in which the pulley acts. Remarks by the Editor. In our list of patents for June last, we noticed this invention, and subsequently published the original specification. The patentee soon found that this specification was defective; he, therefore, surrendered his patent, which was re-issued with the foregoing description. In our previous notices of Mr. Casey's apparatus, we have spoken CASEY'S Dormant Balance. of it in very favourable terms. The opinion which we entertained, received a very powerful support from the unqualified terms of approbation in which a very distinguished physiologist had expressed his conviction of its value; our intimate acquaintance with the individual to whom we referred, justified the confidence with which his judgment was received. Since that period, the instrument has been applied in a number of cases with the most perfect success. We with pleasure enter more into detail respecting this apparatus than we usually do with patents, because we feel that the subject is one of great interest in itself, and more particularly so, as it relates to the cure of a complaint, the sufferers from which are numerous, and to which those whom nature has cast in her finest mould, are the most frequently subjected. We believe that the patentee has supplied what was, until now, a great desideratum in medical mechanics. With the inventor we have no personal acquaintance, and in the invention we have no interest but that of humanity. We have corresponded with Mr. Casey, and with others, upon the subject, and we are authorized to say that doctors Cheesman, D. W. Kissam, jr., D. Kay, and George Wilks, of New York, who professionally visited the British isles, and the continent of Europe, have awarded to Mr. Casey's method of treatment, a character of decided superiority over any thing which they have elsewhere witnessed. We are also assured that every practitioner of eminence who has carefully examined its operation, has concurred in the same opinion; and are informed that upon this united testimony, Dr. John B. Ogden, of New York, a gentleman of talents, and of the most respectable connexions, has taken the apparatus to Europe. The late deeply and justly lamented Dr. King, son of the Hon. Rufus King, pronounced the Dormant Balance the only machine which, in his judgment, could effect a cure; as, by it, the power which is necessary to accomplish the object, permanently, may be applied, with perfect ease and security to the patient. We deem it unnecessary to give the very long array of the names of distinguished practitioners with which we have been furnished, whose opinions are altogether approbatory, but we add an extract of a letter to Mr. Casey, from the pen of a very learned and reputable physician in Boston, who has distinguished himself by his physiological disquisitions in a valuable journal of which he is the editor. "My opinion, as you are aware, must be founded partly upon the knowledge which I have of the cases in which it has been employed, and partly upon general reasoning with regard to the effect of such an application upon the human body. Without having seen a single case, I should have judged that your apparatus, if made use of for a sufficient length of time, and upon a person not too far advanced in life, would generally effect a cure. After having seen it applied in two cases repeatedly, and in a third once, I am ready to say that the immediate influence exerted upon the curved spine, is greater than I should have anticipated; and that the permanent change produced in the shape and height, is such, even after the short period during which the machine has been applied, as fully to confirm the VOL. III.-No. 6. --JUNE, 1829. 54 Observations on the Inclined Plane, &c. opinions I had formed. In short, all that I have seen and known, leads me to believe that your method is superior to any known, and that, if persevered in, with the use of the proper means for preserving and improving the general health, it will prove successful in all but the most aggravated cases." Mr. Casey has used his apparatus extensively in the cities of New York and Boston, and is now in Philadelphia. He is accompanied by his lady, who attends to those patients who prefer the aid, and require the instructions, of one of their own sex. În publishing patents for things appertaining to the healing art, we rarely feel any sensation but that of disgust at the facility with which quacks impose their nostrums upon the community, and increase the evils which they propose to cure; but in cases like the present, the instruments speak for themselves, and the judgment, not the credulity, is addressed. 4 Observations on the Inclined Plane, the Wedge, and the Screw, as Mechanical Powers. By D. H. MASON, Mechanician. TO THE EDITOR OF THE JOURNAL OF THE FRANKLIN INSTITUTE. SIR,-Scientific gentlemen in their lectures and treatises on mechanics, and mechanicians in general, have considered the inclined plane, wedge, and screw, to be very nearly allied, if not identical in principle, promiscuously calling them by their different names; as this opinion appears to me incorrect, I am induced to offer the following remarks for publication in your Journal. Yours, &c. D. H. MASON. It may be proper to offer in the commencement of my remarks, what may be considered a correct definition of the inclined plane and wedge. The inclined plane is merely a plane surface, inclined to the horizon, and is used to raise weights from one level to another. The power required to sustain a weight on an inclined plane, is in the same proportion to the weight, as the perpendicular height is to the length of the inclined surface. D C B Let the hypothenuse A, B, represent the weight D, then the perpendicular C, B, will represent the power E, sufficient to sustain the weight on the plane. And the base A, C, will represent the pressure of the weight D, Eon the plane. These proportions will invariably hold good in all inclinations of the plane. The power to raise a weight on an inclined plane, should always act in the direction of the plane, otherwise it is a compound machine, partaking in part of the principles of the wedge. Observations on the Inclined Plane, &c. The wedge is a triangular piece of metal, wood, or other substance, and is used to separate bodies. The power and resistance are in the same proportion as the base and perpendicular; or in a double wedge, as the length through the centre, and half of the back. A A B C Let the base A, B, represent the resistance, the perpendicular B, C, will represent a power sufficient to sustain the resistance, so that the power and resistance will be in equilibrio. C Or in a double wedge, let the centre A, B, represent the resistance, then half the back C, B, B will represent a power sufficient to sustain the resistance, so that the power and resistance will be Din equilibrio. These proportions will invariably hold good, in all angles of the wedge. In the wedge, the power should always act in the direction of the base, or centre, otherwise it partakes of oblique pressure. In all machines, when the resistance is to be overcome, the power must be increased, sufficiently to overcome the friction. Having premised thus much, I shall give a number of diagrams of the inclined plane and wedge, commencing with a small angle where they may be considered nearly equal, and increasing in the angle, giving the proportions of the power and resistance in each, which will exemplify a vast difference in the two machines. Inclined Plane. Single Wedge. Double Wedge. 4 14° 29' 2 4 2 2 22° 4' 14° 2' 1 1 1 2 1 1 1 26° 34' 30° 1 1 53° 8' Observations on the Inclined Plane, &c. 10 45° 5 5 1 45° 4 45° 1 1 61 1 1 90° 90° 2 From the foregoing diagrams and premises, it is evident that the following differences exist in the inclined plane and wedge. In the inclined plane, the power acts to the greatest advantage, in the direction of the plane. The power and resistance in the inclined plane, are calculated by the hypothenuse and perpendicular. In the inclined plane, at an angle of 14 degrees 29 minutes, the power and resistance are as one to four. In the inclined plane, at an angle of 30 degrees, the power po and resistance are as one to two. In the inclined plane, at an angle of 45 degrees, the power and resistance are nearly as seven and a fourteenth to ten. The power and resistance are equal in the inclined plane, at an angle of 90 degrees. In the wedge, the power acts to the greatest advantage, in the direction of the base, or in a line through the centre. The power and resistance in the wedge, are calculated by the base and perpendicular, or by a line through the centre and half the back. In the single wedge, at an angle of 14 degrees 2 minutes, and in the double wedge, at an angle of 28 degrees 4 minutes, the power and resistance are as one to four. In the single wedge, at an angle of 26 degrees 34 minutes, and in the double wedge, at an angle of 53 degrees 8 minutes, the power and resistance are as one to two. In the double wedge, at an angle of 45 degrees, the power and resistance are nearly as four and one-third to ten. The power and resistance are equal, in the single wedge, at an angle of 45 degrees, and in the double wedge at an angle of 90 degrees. Isometrical Perspective. The inclined plane can never exceed 90 degrees. In the inclined plane, the power can never exceed the resistance. The single wedge may be made nearly to an angle of 90 degrees, and the double wedge nearly to an angle of 180 degrees. In the single wedge, having an angle greater than forty-five degrees, and in the double wedge, having an angle greater than ninety degrees, the power will always exceed the resistance, therefore it may be denominated an inverted wedge. The following are legitimate conclusions from the foregoing. The inclined plane and wedge are distinct mechanical powers. The single wedge is the most simple form, as the double wedge is two single ones together. The double wedge may always be calculated as to the proportions of power and resistance, as a single wedge having half the angle of the double one. The inclined plane and wedge proceed in different ratios of angle, from a small to a greater, for the same power. The Screw. The screw may be denominated a spiral wedge, and in all its applications never acts as an inclined plane, which will be evident on considering the laws of the plane and wedge, as stated above; the method of calculating the power and resistance, is also the same as the wedge; one circumference of the screw gives the base, and the distance from the centre of one trait, or thread, to another, gives the perpendicular. The screw, however, must be considered as a compound machine, being in almost all its applications necessarily turned by a lever, which must be taken into account in calculating its power, in which case the distance the end of the lever (where the power is applied) passes in one revolution gives the base, and the distance from the centre of one trait to another gives the perpendicular. And further, the screw is always used double, having a counter screw, or that which is equivalent to it, as the teeth of a wheel in a tangent screw. This statement respecting the screw, is not meant to exclude the existence of a spiral inclined plane, such as the representation of the Tower of Babel, or an ascending road round a hill or mountain, which differ materially from the screw, in the calculation of the power and resistance, having no resemblance to it but its spiral form. Notice respecting Professor Farish's Isometrical Perspective. By the EDITOR. PROFESSOR FARISH, of the University of Cambridge, in England, has introduced a new mode of drawing in perspective, which is peculiarly applicable to the delineation of machinery, as the proximate and the most distant parts of the thing represented which lie in the Isometrical Perspective. same plane, are all drawn to the same scale. The designation " I80metrical," was given to it by its inventor, to express this fact, as it signifies to the same measure. The great peculiarity in this mode of drawing in perspective, is, that there is no vanishing point; or, what is the same thing, the vanishing point may be considered as at an indefinite distance from the object. Perhaps a clear idea of the principle upon which such a representation depends, may be obtained by supposing a telescopic view of a single and distant object to be delineated. Let a carriage, for example, be placed at the distance of a mile from the observer, and that to obtain a distinct view of it, he looks at it through a telescope. From a point of sight so distant, every part seen in the same plane, will, as to sense, appear Isometrical, and the scale which would measure the nearer, would also measure the more distant wheels. We are not aware that, in this country, this kind of perspective has been employed previously to the adoption of it by Mr. Howard in the representation of his rail-way carriage, Fig. 4th, Plate 8th, of this volume. To give an exact representation of the proportionate dimensions of a machine, it has been common to exhibit it orthographically in its three principal directions, one on the horizontal plane, and two on vertical planes, at right angles with each other. This mode may be seen by referring to Figs. 1 and 2, Plate 7, and Fig. 1, Plate the 8th. In the drawing, Fig. 4th, the view of the carriage is supposed to be taken on the same horizontal plane on which it stands, and all the parts on the two vertical planes, are, consequently, Isometrical.
About this record
- Patentee
- Jim Shaw's X-patent list
- Date
- the Name and Date index of patents, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, Jim Shaw's X-patent list, the Journal of the Franklin Institute