Drawings and documents
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 3 (1829), p. 138 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a patent for an improvement in the manufacture of Malleable Iron, and of an improved Bloomery Furnace. Issued to BENJAMIN B. HOWELL, Philadelphia, November 6, 1828. THE discovery consists of an improvement in the construction of the Bloomery furnace,* by means of which, and the use (in the manner hereinafter described,) of anthracite coal, exclusively, for fuel, iron ore is directly converted into malleable iron. The drawings exhibit an elevation, and vertical and horizontal sections. By these, and the notes and references appended thereto, it will be seen that this furnace combines within itself, the advantages of both a close furnace and an open fire; in this respect differing, essentially, from any other now in use for similar objects. In the upper or close portion, being all that above the hearth, with anthracite coal excited by a proper blast, a degree of heat is obtained much greater than can possibly be generated in the ordinary fire with charcoal; while the lower portion opening into the hearth, and permitting the free action of blast upon the burthen, performs all the offices of the open fire, or forge. The size of the furnace and the proportions may be varied, if the principle of the close and open fire be retained. The furnace being first heated up in the manner of a common cupola, the process is thus conducted. The coal having settled sufficiently for that purpose, it is charged with the proper burthen of ore, which will vary according to the quality and kind. The charges are then continued, alternately of coal and ore. The ore soon arrives at the tuyeres in a state of partial fusion, and is then, by the intense heat of that part of the furnace, quickly separated from its earths; and then rapidly descending into, and below the direct action of, the blast, a large part of which is driven out at the open front, first passing over that portion of the ore which has reached the hearth, it is thereby brought, in the language of the workmen, "to nature," or, in other words, into malleable iron. As it sinks into the region of the blast, the small masses may be driven into one, and a loup shaped by giving a proper direction to the pipes at the different tuyeres, and the loup can be removed with a proper instrument, another instrument, or strong iron bars, being introduced at B, to hold up the burthen while this is doing. The loup may be drawn into a bloom under a forge hammer, or passed through rollers. In either operation it will, of course, be necessary to renew the heats, which may be done in a common chaffery, or in a heating furnace. This process is continued at the pleasure of the workmen, and as soon as a quantity sufficient for a loup accumulates, it is withdrawn, as above described. In the early stage of the operation it will be necessary to charge the furnace nearly, or quite, to the top; but, as the heat increases, the height of the coal may be gradually diminished, and at a very * Bloomery is here used in the sense commonly understood in this country. HOWELL'S improvement in Malleable Iron. high temperature, from two to three feet of coal will be found sufficient. The cinder produced in this way will, in all respects, resemble forge, or bloomery cinder, and will bear working a second time; an appropriate flue facilitates the operation, and, as it is first fused, and sinks, and is thus interposed between the iron at the bottom of the hearth, and the coal, it contributes to prevent a mixture of the two. Holes may, or may not, be left in the sides of the furnace for the introduction of bars to aid in detaching the iron from the bottom and sides; but this will not often be necessary, if the back of the furnace be thrown sufficiently forward and a proper direction be given to the blast; for which purpose, tuyeres are placed in different positions on three sides of the furnace, and at different elevations. One or two pipes may be used at pleasure. From the foregoing, it must be obvious that by the rapidity of the process, the saving thereby of time and labour, the substitution of a cheaper, more powerful and abundant fuel, for that now in use, and which is so made applicable to this object, by the peculiar construction of this furnace, that a great and important improvement has been effected in the conversion of iron ore into malleable iron. B. B. HOWELL. Notes and References for the improved Bloomery Furnace. The drawings, Figs. 4, 5 & 6. Plate IV., represent an elevation, and vertical and horizontal sections, all drawn upon a scale of three feet to an inch, and the same letters refer to the corresponding parts of each. A.-Trundle head where the furnace is charged; to be provided with a cover, which is placed on in the intervals of charging, when the coal is low. B.-Projecting, open, hollow hearth, for the reception of cinder and iron, with a cinder hole at C, to be opened when it is wished to draw off the cinder. DD.-Tuyeres, for the introduction of the blast, placed in different positions on three sides of the furnace, and at different elevations, to vary the direction of the blast at different stages of the process. The back and front in-walls may both, or either, be thrown or inclined somewhat more inward than is represented in the drawing, and as indicated by the dotted lines in the vertical section; and with advantage when the ore is not very pure, and makes much cinder. The furnace should have over it a brick canopy, or a chimney, to aid in giving a direction to the gas given out by the coal, which is distressing to the workmen if largely diffused immediately around it. The furnace should be lined with fire brick, and cased with cast iron plates, secured by strong bolts, keys and screws, and, between the casing and lining, common brick with a thin packing of sand; the latter, to prevent injury from expansion. B. B. HOWELL. Notes on the foregoing. In a letter from the patentee, which was received with his application, he observes, "I some time since menManufacture of Diamonds. tioned to you, that I had then completed some further experiments with anthracite coal, the result of which I should soon communicate to you, and which I thought would both interest and surprise you. The papers which I enclose will explain what these experiments were. They relate to an improvement in the Bloomery furnace, and in the conversion of iron ore into malleable iron, with anthracite coal, exclusively. In this, in six different experiments, I completely succeeded, making, in a comparatively short time, perfect bar iron, and, indeed, nails, without suffering it ever to cool. Practical forgemen, who performed the manual labour, were astonished beyond measure, at the result: it was, indeed, complete in every respect, the iron being as good as that made at the neighbouring forges, in the old way. "Refining of pig-iron, has been attempted in Pennsylvania, but, I believe, abandoned, from the difficulty of preventing a mixture of coal with the iron, in its soft state; this, in my method, is obviated, almost entirely. The process is rapid, and even here, where the coal is high, is economical; how much more must it be so, where coal, and ore, can be had for digging." The editor has in his possession, a part of the bar, and a nail, forged directly, and without cooling, from the first bloom made in this way; he will seek for further information upon the progress of this improvement. Manufacture of Diamonds. Ar a recent meeting of the Academie des Sciences, a letter was read from M. Gannal, stating the result of his inquiries into the action of phosphorus, brought into contact with pure carburet of sulphur. Having occasion to prepare a large quantity of carburet of sulphur, M. Gannal conceived the idea of endeavouring to separate the sulphur of this product, in order to obtain a pure carbon. Phosphorus was the material which he used; and he found that the phosphorus entering into combination with the sulphur, the carbon was set at liberty in the shape of small crystals, possessing all the properties of the diamond, and especially that of scratching the hardest bodies. The following is a detail of the experiment:If several rolls of phosphorus are introduced into a matrass containing carburet of sulphur, covered with a layer of water, the moment the phosphorus finds itself in contact with the carburet, it dissolves, and, becoming liquid, is precipitated to the lower part of the matrass. The whole mass is then divided into three distinct layers; the first forined of pure water, the second of carburet of sulphur, and the third of liquefied phosphorus. Things being in this state, if the matrass be agitated so as to cause the mixture of the different bodies, the liquor grows thick, becomes milky, and, after a little rest, separates anew, but only into two layers; the upGreat Ship Canal of the Netherlands. per one of pure water, the under one of phosphuret of sulphur; and between those two layers, there is a very thin stratum of white powder, which, when the matrass is exposed to the sun's rays, exhibits all the colours of the prism; and which, consequently, appears to be formed of a multitude of little crystals. Encouraged by this experiment, M. Gaunal endeavoured, by the following process, to obtain larger crystals, and succeeded. He introduced into a matrass, placed where it would be quite undisturbed, first eight ounces of water, and then eight ounces of carburet of sulphur, and eight ounces of phosphorus. As in the preceding experiment, the phosphorus dissolved; and the three liquids arranged themselves in the order of their specific gravity. After four-andtwenty hours, there was formed between the layer of water and the layer of carburet of sulphur, an extremely thin pellicle of white powder, having here and there several air-bubbles, and various centres of crystallization, formed, some by spars of very thin sheets, and others by stars. In the course of a few days, this pellicle gradually grew thicker. At the same time, the separation of the two inferior liquids became less complete; and in three months they appeared to form but one and the same substance. Another month having elapsed without any new result, the question was, how to find means of separating the crystallized substance from the phosphuret of sulphur, to which the inflammability of the mixture presented great obstacles. After several attempts, more or less unsuccessful, M. Gannal determined to filter the whole through a chamois skin, which he afterwards placed under a glass bell, taking care, from time to time, to renew the air. At the end of a month, this skin becoming capable of being handled without inconvenience, it was doubled up, washed, and dried. For the first time, M. Gannal was then enabled to examine the crystallized substance which remained on its surface. Exposed to the sun's rays, this substance presented numerous crystals, reflecting all the colours of the rainbow. Twenty of them were large enough to be taken up with the point of a penknife; and three others were of the size of a grain of millet. These last, having been submitted to the inspection of an experienced jeweller in Paris, were pronounced by him to be real diamonds! A. M. Delatour states that he has, also, produced the diamond by a different process, of which a brief notice shall appear in our next. [Lit. Gazette. Great Ship Canal of the Netherlands. THE object of the Great Canal, is, to afford a passage for large vessels from Amsterdam to the sea. This city has forty feet of water in the road in front of its port, but the Pampas, or bar in the Zuyder Zee, seven miles below, has only a depth of ten feet, and hence all ships of any considerable burden, have to unload part of their cargoes with lighters, before they enter the port. As the sea Great Ship Canal of the Netherlands. in question is full of shallows throughout, all ordinary means of improving the access to the port, were necessarily ineffectual; and the resolution was, therefore, at length adopted, of cutting a canal from the town to the Helder, the northernmost point of the province of Holland. The distance between these extreme points is 41 English miles, but the length of the canal is about 50%. The breadth at the surface of the water, is 124 English feet (120 Rhinland feet;) the breadth at bottom 36; the depth, 20 feet 9 inches. Like the Dutch canals, generally, its level is that of the high tides of the sea, from which it receives its supply of water. The only locks it requires, of course, are two tide locks at the extremities; but there are, besides, two sluices with flood-gates in the intermediate space. It has only eighteen bridges (draw-bridges) in its whole length. The locks and sluices are double, that is to say, there are two in the breadth of the canal; and we learn from Mr. Bald, that their construction and workmanship are excellent. They are built of brick for economy, but bands of lime-stone are interposed at intervals, and these project about an inch beyond the brick, to protect it from abrasion by the sides of the vessels. There is a broad towing-path on each side, and the canal is wide enough to admit of one frigate passing another. From the river Ye at Amsterdam, it proceeds north to Purmerend, thence west to Alkmaar Lake, thence north by Alkmaar to a point within two miles of the coast, near Petten, and it continues to run nearly parallel to the coast from this point to the Helder, where it joins the sea, at the fine harbour of Niewediep, formed within the last thirty years. At the latter place, there is a powerful steam engine for supplying the canal with water during neap tides, and other purposes. The time spent in tracking vessels from the Helder to Amsterdam, is eighteen hours. The Helder point is the only spot on the shores of Holland that has deep water; and it owes this advantage to the Island of Texel, opposite, which, by contracting the communication between the German Ocean and the Zuyder Zee, to a breadth of a mile, produces a current which scours and deepens the channel. Immediately opposite the Helder, there is 100 feet of water at high tides, and at the shallowest part of the bar to the westward, there are twenty-seven feet. In the same way, the artificial mound which runs into the lake or river Ye, opposite Amsterdam, by contracting the water-way to about 1000 feet, keeps a depth of forty feet in the port (at high water,) while above and below there is only ten or twelve. The canal was begun in 1819, and finished in 1825. The cost was estimated at ten or twelve millions of florins, or about one million sterling. If we compute the magnitude of this canal by the cubic contents of its bed, it is the greatest, we believe, in the world, unless some of the Chinese canals be exceptions. The volume of water which it contains when filled, or the prism de remplissage, is twice as great as that of the New York Canal, or the Canal of Languedoc, and two and a half times as great as that of the Caledonian Canal, if we include only those parts of the latter which have been cut with human labour. [Lond. New Monthly Mag. FRANKLIN INSTITUTE. A MEETING of the board of managers was held at the hall, January 20, 1829. James Ronaldson, president, in the chair. The actuary read so much of the minutes of the annual meeting of the Institute, held the 15th inst. as related to the election of this board. Whereupon, the board went into an election for chairman and curators for the ensuing year. Messrs. Samuel J. Robbins and Isaac B. Garrigues, were appointed tellers, who reported the following gentlemen duly elected, viz. HENRY HORN, Chairman, GEORGE Fox, and THOMAS M'EUEN, M. D. } Curators. On motion, it was Resolved, that the stated meetings of this board be held on the second Thursday evening in every month. The candidates proposed at the last meeting of the former board, were duly elected members of the Institute. A stated meeting of the board of managers was held at the hall on Thursday, February 12, 1829. Mr. Henry Horn, chairman. The minutes of the last meeting were read and approved. The chairman appointed the following standing committees, which were approved by the board, viz. George Fox, J. B. Garrigues, Henry Horn, On Instruction. Thomas M'Euen, M. D. Isaac Collins, Charles Wheeler, C. D. Meigs, M. D. Charles Roberts, On the Cabinet of Models. Wm. Yardley, jr. R. R. Lewis. On the Library. Isaac Hays, M. D. Thomas Loud, Charles H. White, Frederick Fraley. George Fox, Rufus Tyler, John Struthers, John O'Neill, Abraham Miller, Isaiah Lukens, Joseph H. Schreiner, Thomas Scattergood. On the Cabinet of Minerals. Isaac Hays, M. D. On Premiums and Exhibitions. James Ronaldson, Adam Ramage, Isaiah Lukens, Mordecai D. Lewis, Thomas M'Euen, M. D. James Rowland, jr. Christian Gobrecht, Mathias W. Baldwin, Samuel J. Robbins, Algernon S. Roberts. Franklin Institute. Samuel V. Merrick, Isaac Hays, M. D. On Publications. Isaiah Lukens, Mathias W. Baldwin. Rufus Tyler, On Inventions. James Ronaldson, Andrew Young, Mathias W. Baldwin, Christian Gobrecht, Isaiah Lukens, Samuel V. Merrick, Benjamin Reeves. Managers of the Sinking Fund. Samuel V. Merrick, Ashbel G. Ralston, Samuel J. Robbins. Auditors. Abraham Miller, Isaac B. Garrigues. The special committee appointed by the late board, at the request of Mr. İsaac M'Cauley, to visit his floor cloth manufactory, presented a report, which was read, and on motion, the actuary was directed to furnish Mr. M'Cauley with a copy. The corresponding secretary presented the following communications, viz. a work, entitled, "Du Développement, à donner à quelques parties principales et essentielles de notre Industrie Intérieure," from the author, M. de Moleon, Chief Engineer of the king's cabinet, and of the Royal Domains of France. And, also, a letter from the same, requesting to be elected a correspondent. A letter from M. Chersant, Vice Consul of France, enclosing the above, and offering to transmit any communications for the Institute.-A letter from the Franklin Institute of Rochester, New York, acknowledging the receipt of the Journal of the Franklin Institute, for the past year, and expressing a desire to continue the correspondence. Whereupon, it was Resolved, that the corresponding secretary be instructed to forward the Journal of the Institute to that Institution, as published, and to continue the correspondence. On motion, it was Resolved, that a committee be appointed to report to this board the design and expense of a diploma of membership, to be issued to the members of the Institution. Isaac Hays, M.D., and Messrs. Samuel V. Merrick and Thomas Loud were appointed said committee. Resolved, that the above committee be instructed, also, to report the design of a certificate, to accompany the medals awarded at the exhibitions of the Institution. Resolved, that a committee be appointed to report a plan for the monthly meetings of the Institution. Isaac Hays, M. D., and Messrs. Samuel V. Merrick and Rufus Tyler were appointed said committee. Resolved, that a committee be appointed to have cases for the cabinets of minerals and models put in the meeting room. Isaac Prevention of Forgery. Hays, M. D., Thomas M'Euen, M. D., and Mr. Isaiah Lukens, were appointed said committee. Resolved, that the committee on premiums and exhibitions be instructed to prepare a list of premiums to be awarded at the next exhibitio
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 3 (1829), p. 117 · View the page
4. For an improvement in the Manufacture of Malleable Iron, and an improved Bloomery Furnace; Benjamin B. Howell, Philadelphia, November 6.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 3 (1829), p. 137 · View the page
We think Mr. Howell's remarks highly interesting, and hope soon to hear from him the results of his further important investigations and experiments. For the fact of a flame of six feet in height, from anthracite, we were not prepared; nor are we now of opinion that the flame actually extended from the fire to the top of the chimney, but believe that the flue was filled with heated air, consisting of nitrogen, carbonic acid, and carbonic oxide, and that the latter inflamed on its coming in contact with the oxygen of the atmosphere. This remark has little to do with the practical utility of Mr. Howell's furnace, and is intended only to apply to the theory of the production of the flame, which issued from the chimney, and which, we apprehend, was not twenty-one feet in length. VOL. III.-No. 2. - FEBRUARY, 1829. 18 Specification of a patent for an improvement in the manufacture of Malleable Iron, and of an improved Bloomery Furnace. Issued to BENJAMIN B. HOWELL, Philadelphia, November 6, 1828.
Remarks. THE discovery consists of an improvement in the construction of the Bloomery furnace,* by means of which, and the use (in the manner hereinafter described,) of anthracite coal, exclusively, for fuel, iron ore is directly converted into malleable iron. The drawings exhibit an elevation, and vertical and horizontal sections. By these, and the notes and references appended thereto, it will be seen that this furnace combines within itself, the advantages of both a close furnace and an open fire; in this respect differing, essentially, from any other now in use for similar objects. In the upper or close portion, being all that above the hearth, with anthracite coal excited by a proper blast, a degree of heat is obtained much greater than can possibly be generated in the ordinary fire with charcoal; while the lower portion opening into the hearth, and permitting the free action of blast upon the burthen, performs all the offices of the open fire, or forge. The size of the furnace and the proportions may be varied, if the principle of the close and open fire be retained. The furnace being first heated up in the manner of a common cupola, the process is thus conducted. The coal having settled sufficiently for that purpose, it is charged with the proper burthen of ore, which will vary according to the quality and kind. The charges are then continued, alternately of coal and ore. The ore soon arrives at the tuyeres in a state of partial fusion, and is then, by the intense heat of that part of the furnace, quickly separated from its earths; and then rapidly descending into, and below the direct action of, the blast, a large part of which is driven out at the open front, first passing over that portion of the ore which has reached the hearth, it is thereby brought, in the language of the workmen, "to nature," or, in other words, into malleable iron. As it sinks into the region of the blast, the small masses may be driven into one, and a loup shaped by giving a proper direction to the pipes at the different tuyeres, and the loup can be removed with a proper instrument, another instrument, or strong iron bars, being introduced at B, to hold up the burthen while this is doing. The loup may be drawn into a bloom under a forge hammer, or passed through rollers. In either operation it will, of course, be necessary to renew the heats, which may be done in a common chaffery, or in a heating furnace. This process is continued at the pleasure of the workmen, and as soon as a quantity sufficient for a loup accumulates, it is withdrawn, as above described. In the early stage of the operation it will be necessary to charge the furnace nearly, or quite, to the top; but, as the heat increases, the height of the coal may be gradually diminished, and at a very * Bloomery is here used in the sense commonly understood in this country. HOWELL'S improvement in Malleable Iron. high temperature, from two to three feet of coal will be found sufficient. The cinder produced in this way will, in all respects, resemble forge, or bloomery cinder, and will bear working a second time; an appropriate flue facilitates the operation, and, as it is first fused, and sinks, and is thus interposed between the iron at the bottom of the hearth, and the coal, it contributes to prevent a mixture of the two. Holes may, or may not, be left in the sides of the furnace for the introduction of bars to aid in detaching the iron from the bottom and sides; but this will not often be necessary, if the back of the furnace be thrown sufficiently forward and a proper direction be given to the blast; for which purpose, tuyeres are placed in different positions on three sides of the furnace, and at different elevations. One or two pipes may be used at pleasure. From the foregoing, it must be obvious that by the rapidity of the process, the saving thereby of time and labour, the substitution of a cheaper, more powerful and abundant fuel, for that now in use, and which is so made applicable to this object, by the peculiar construction of this furnace, that a great and important improvement has been effected in the conversion of iron ore into malleable iron. B. B. HOWELL. Notes and References for the improved Bloomery Furnace. The drawings, Figs. 4, 5 & 6. Plate IV., represent an elevation, and vertical and horizontal sections, all drawn upon a scale of three feet to an inch, and the same letters refer to the corresponding parts of each. A.-Trundle head where the furnace is charged; to be provided with a cover, which is placed on in the intervals of charging, when the coal is low. B.-Projecting, open, hollow hearth, for the reception of cinder and iron, with a cinder hole at C, to be opened when it is wished to draw off the cinder. DD.-Tuyeres, for the introduction of the blast, placed in different positions on three sides of the furnace, and at different elevations, to vary the direction of the blast at different stages of the process. The back and front in-walls may both, or either, be thrown or inclined somewhat more inward than is represented in the drawing, and as indicated by the dotted lines in the vertical section; and with advantage when the ore is not very pure, and makes much cinder. The furnace should have over it a brick canopy, or a chimney, to aid in giving a direction to the gas given out by the coal, which is distressing to the workmen if largely diffused immediately around it. The furnace should be lined with fire brick, and cased with cast iron plates, secured by strong bolts, keys and screws, and, between the casing and lining, common brick with a thin packing of sand; the latter, to prevent injury from expansion. B. B. HOWELL. Notes on the foregoing. In a letter from the patentee, which was received with his application, he observes, "I some time since menManufacture of Diamonds. tioned to you, that I had then completed some further experiments with anthracite coal, the result of which I should soon communicate to you, and which I thought would both interest and surprise you. The papers which I enclose will explain what these experiments were. They relate to an improvement in the Bloomery furnace, and in the conversion of iron ore into malleable iron, with anthracite coal, exclusively. In this, in six different experiments, I completely succeeded, making, in a comparatively short time, perfect bar iron, and, indeed, nails, without suffering it ever to cool. Practical forgemen, who performed the manual labour, were astonished beyond measure, at the result: it was, indeed, complete in every respect, the iron being as good as that made at the neighbouring forges, in the old way. "Refining of pig-iron, has been attempted in Pennsylvania, but, I believe, abandoned, from the difficulty of preventing a mixture of coal with the iron, in its soft state; this, in my method, is obviated, almost entirely. The process is rapid, and even here, where the coal is high, is economical; how much more must it be so, where coal, and ore, can be had for digging." The editor has in his possession, a part of the bar, and a nail, forged directly, and without cooling, from the first bloom made in this way; he will seek for further information upon the progress of this improvement. Manufacture of Diamonds. Ar a recent meeting of the Academie des Sciences, a letter was read from M. Gannal, stating the result of his inquiries into the action of phosphorus, brought into contact with pure carburet of sulphur. Having occasion to prepare a large quantity of carburet of sulphur, M. Gannal conceived the idea of endeavouring to separate the sulphur of this product, in order to obtain a pure carbon. Phosphorus was the material which he used; and he found that the phosphorus entering into combination with the sulphur, the carbon was set at liberty in the shape of small crystals, possessing all the properties of the diamond, and especially that of scratching the hardest bodies. The following is a detail of the experiment:If several rolls of phosphorus are introduced into a matrass containing carburet of sulphur, covered with a layer of water, the moment the phosphorus finds itself in contact with the carburet, it dissolves, and, becoming liquid, is precipitated to the lower part of the matrass. The whole mass is then divided into three distinct layers; the first forined of pure water, the second of carburet of sulphur, and the third of liquefied phosphorus. Things being in this state, if the matrass be agitated so as to cause the mixture of the different bodies, the liquor grows thick, becomes milky, and, after a little rest, separates anew, but only into two layers; the upGreat Ship Canal of the Netherlands. per one of pure water, the under one of phosphuret of sulphur; and between those two layers, there is a very thin stratum of white powder, which, when the matrass is exposed to the sun's rays, exhibits all the colours of the prism; and which, consequently, appears to be formed of a multitude of little crystals. Encouraged by this experiment, M. Gaunal endeavoured, by the following process, to obtain larger crystals, and succeeded. He introduced into a matrass, placed where it would be quite undisturbed, first eight ounces of water, and then eight ounces of carburet of sulphur, and eight ounces of phosphorus. As in the preceding experiment, the phosphorus dissolved; and the three liquids arranged themselves in the order of their specific gravity. After four-andtwenty hours, there was formed between the layer of water and the layer of carburet of sulphur, an extremely thin pellicle of white powder, having here and there several air-bubbles, and various centres of crystallization, formed, some by spars of very thin sheets, and others by stars. In the course of a few days, this pellicle gradually grew thicker. At the same time, the separation of the two inferior liquids became less complete; and in three months they appeared to form but one and the same substance. Another month having elapsed without any new result, the question was, how to find means of separating the crystallized substance from the phosphuret of sulphur, to which the inflammability of the mixture presented great obstacles. After several attempts, more or less unsuccessful, M. Gannal determined to filter the whole through a chamois skin, which he afterwards placed under a glass bell, taking care, from time to time, to renew the air. At the end of a month, this skin becoming capable of being handled without inconvenience, it was doubled up, washed, and dried. For the first time, M. Gannal was then enabled to examine the crystallized substance which remained on its surface. Exposed to the sun's rays, this substance presented numerous crystals, reflecting all the colours of the rainbow. Twenty of them were large enough to be taken up with the point of a penknife; and three others were of the size of a grain of millet. These last, having been submitted to the inspection of an experienced jeweller in Paris, were pronounced by him to be real diamonds! A. M. Delatour states that he has, also, produced the diamond by a different process, of which a brief notice shall appear in our next. [Lit. Gazette. Great Ship Canal of the Netherlands.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.