Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 6 (1830), p. 226 · View the page
21. For an improvement in the mariner's and surveyor's Compass Needle; Moses Smith, City of New York, June 15.
Remarks. (See the specification.)
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 6 (1830), p. 238 · View the page
The effect of squeezing or pressing the paper evenly throughout the whole sheet, so that it may be delivered in an even manner into the rollers by any process, is part of my discovery, as it has never been done in any manner; and I describe the above as one way I have adopted to effect it. It may be done also by pressing a straight edge or cushion up to one of the rollers, and passing the sheet of paper between the straight edge or cushion, so as to gripe the paper against the roller in order to pass it evenly into the action at the contact of the rollers. Another part of my invention consists in fixing a permanent iron bar, or rod, opposite to the contact or conjunction of the two rollers, so that accidents may be prevented by things going into them, or persons being caught and hurt by them; the said bar to be connected to the standard or sides of the iron frame in which the rollers are suspended. THOMAS GILPIN. Specification of a patent for an improvement in the Mariner's and Surveyor's Compass Needle, and the mode of using the same, by means of a metallic cap, or feeder, on each side of the centre, and of an electric rod, of brass, or other suitable metal, or material. Granted to MOSES SMITH, City of New York, June 15, 1830.
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 6 (1830), p. 238 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a patent for an improvement in the Mariner's and Surveyor's Compass Needle, and the mode of using the same, by means of a metallic cap, or feeder, on each side of the centre, and of an electric rod, of brass, or other suitable metal, or material. Granted to MOSES SMITH, City of New York, June 15, 1830. THE needle to be used may be hung in the usual manner; it should be rather heavier than that now in common use: the poles of the needle should be of a uniform breadth and thickness, with a small point at the extremity, which, in the mariner's needle, may be placed on the end, which should be a little rounded, so as to admit the cap, or feeder, to be placed as near the end as may be. On each pole of the needle should be placed a sliding cap, or, as I consider it, a feeder, to be made of soft iron, or other suitable metallic substance, which may slide, or be moveable from the centre, to the extremity of the needle. This cap may be formed of fine soft iron wire, or other suitable wire, of a size suitable to the needle, and may be of a breadth, computing from the centre to the extremity of the pole of the needle, of about one-sixteenth part of the length of the pole, or of a greater or less breadth as circumstances may require; or the cap may be made of a thin plate of soft iron, or other suitable material of the same breadth. This cap, or feeder, must surround the pole, in contact with it, and slide thereon, as easily as is consistent with the retention of the place in which it is placed. When any attraction foreign from the polar attraction occurs, or is apprehended, such as from cannon, or other iron on ship board, or beds of iron ore on land, or from other substances, the caps, or feeders, must be moved as near to the points of the needle as they can go, but not so far as to cover the point. By this the foreign attraction upon the needle is greatly lessened, if not entirely destroyed; and when such foreign attraction does not require to be counteracted, the caps should be moved towards the centre, to render the needle subject to the polar attraction in the usual manner. When the needle is out of use, the caps should be placed at the ends, so as to preserve the magnetic power. I do not claim any exclusive right, as inventor, to the form or material of the needle, or point, but only to the application of the cap, or feeder, to the mariner's or surveyor's compass needle, and its use as before described. The electric rod for a mariner's compass needle, may be made of brass, or other suitable material, about ten inches long, and a quarter of an inch in diameter, or of any other suitable material, about ten inches long, and a quarter of an inch in diameter, or of any other size which may be capable of giving the shock hereafter described; and the electric rod for the surveyor's compass needle, may be of half the above size, but in other respects like the former. This rod is to be used for the purpose of putting into action the magnetic power, when the needle has parted with, or lost, any portion of the magnetic power, or becomes variable, or confused in its traverse; and the mode of use is as follows. The needle must be taken out of the compass and laid in a solid position, lengthwise, on a hard plane substance, which substance must be struck with a sharp quick stroke, with the electric rod, close to each side the centre of the needle, which should be held firmly pressed down with the hand. If it be desired to increase the magnetic power, the substance should be struck near to each end of the needle pointed towards the line of. direction of the rod; and if the needle be confused, the substance 1 should be struck near the centre of the needle. This substance may be iron, stone, or firm wood, so that the needle may receive a shock. It is not necessary that the shock should be great, or the stroke heavy, in any case, but it should be graduated according to the defect to be remedied. The stroke should be made with one end of the rod falling flat on the substance to be struck, the hand holding the other end. Immediately after the stroke the needle should be placed on its pivot, when it will take its pole with its former power. I do not claim any exclusive right as inventor in the form or material of the rod, but only in the application of it in the restoration of the magnetic power of the needle in the manner before described. The electric rod may be applied to the compass needle now in common use, and the caps, or feeders, to any compass needle, the breadth or thickness of each pole being uniform, so as to permit the cap to slide in contact therewith, as before described. When the feeders are slipped near the poles of the needles, this improved needle will show no variation, but take the true meridian any where. MOSES SMITH.
Editor's remarks. To examine the pretensions set forth in the foregoing specification would be a mere waste of time, and to pass it over without making any remark upon it might induce some of our readers to suppose that some value was set by us upon the notions of the patentee; whilst, therefore, we shall say but little upon the subject, it yet appears necessary to indicate our opinion. We have not only read the specification, and examined the drawings which accompany it, but we have seen the proposed compass needles, with their feeders, and heard the explanations of the inventor, or discoverer, of this improvement, or rather of these improvements. Notwithstanding all these lights have shone upon us, we are still unilluminated. Men of science know that there exists an intimate connexion between the powers of electricity and of magnetism, and recent discoveries have rendered it highly probable that they are modifications of the same agent; their knowledge respecting them is, however, confined to a few facts, not sufficiently numerous to justify the formation of any theory by which they may be connected together. Whilst those who are acquainted with all the known facts are unable to explain and connect them, it so happens in this, as in similar cases, that there are bold spirits who, although they have acquired but half an idea respecting a single fact, are able by the aid of "the stuff which dreams are made of" to draw inferences, and arrive at conclusions, which are far in advance of those who think it necessary to "render a reason." To any one acquainted with electricity the absurdity of applying its power by what is above styled the electric rod, will be at once manifest; we are of opinion that the whole is in good keeping in this particular, and that the only advantage resulting from the patent will be to the treasury of the United States. ENGLISH PATENTS. To ROBERT LLOYD, Hatter, and JAMES ROWBOTHAM, Hat Manufacturer, for a Hat upon a new Construction. Dated February 19, 1824. 1 I, THE said Robert Lloyd, do hereby declare, that the nature of the said invention, and in what manner the same is to be performed, are particularly described and ascertained in the following description thereof, (that is to say:-) The plan or construction of Lloyd and Rowbotham's hats, which is entirely new and their own sole invention, and for which they have obtained his majesty's letters patent, is as follows:First, this hat is made, or will be made or manufactured, either wholly or by mixtures of hair, wool, silk, cotton, fur, leather, flax, hemp, straw, or any other materials or material not prohibited by law, nor protected by any patent right vested in other persons; they will also be made from silk, or cotton velvet, superfine or other woollen or linen cloths. Second, the peculiar construction of this hat, and wherein it differs from all hitherto manufactured, is, that the crown is made to rise and fall, so as to assume different heights, and the way it is done, is, that one part of the crown is made to retire, fold, or shut within the other, by which operation the middle part of the crown is wholly taken up, retiring within itself, somewhat like a telescope: thus it is, that the same hat may be worn as a high crown or a low crown, and in the latter case the folding or spare part is taken up, so as to be completely out of sight; it is this peculiar way of folding, which is entirely new, that the patentees, Lloyd and Rowbotham, claim as their invention. Third, although the materials with which these hats are or may be made, will generally be put together or manufactured in the usual manner of hat making, there is one way or method which the patentees have adopted, and which they believe never has been done by any other person, viz. instead of making the body of the hat, or the hat altogether in one piece, they have done, and will, for greater facility, cut out two or
About this record
- Patentee
- the Journal of the Franklin Institute, Journal
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847), the Journal of the Franklin Institute, Journal
- The patentee's full name comes from the Franklin Institute's journal.
- The residence comes from the Franklin Institute's journal.
- Burke's 1847 Patent Office list gives the same patent.